Use the proper tool to remove your raw water impeller without damaging the old impeller or the pump seal. Prying out the impeller leads to premature seal failure and damage to the brass impeller housing.

This impeller puller is the right tool for the job and allows for the easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the T-handle center screw to pull the impeller out of the pump with ease.

Product Details:

• Works great on Johnson 09-812 impellers & F6B pumps
• Diameter 2-1/4″ inches to 2-9/16″ inches
• Handle length 3-7/16″ inches
• Height 5-3/16″ inches